The Euroterm AURA R K 35 S condensing boiler is designed for the production of domestic hot water and heating through an external boiler. It uses condensing technology to recover heat from flue gases and achieve higher efficiency, requiring a drain due to high condensate production.

With the Euroterm AURA R K 25 S condensing boiler, you achieve both heating and domestic hot water efficiently with the aid of an external boiler. The advanced condensing technology improves energy yield, requiring a drain for the condensate.

With the Euroterm AURA R K 18 S condensing boiler, you achieve both heating and domestic hot water efficiently with the aid of an external boiler. The advanced condensing technology improves energy yield, requiring a drain for the condensate.

The open chamber and pilot flame boiler Euroterm SIMPLEX 20 P is a boiler in which the main burner is ignited with the help of a pilot light that remains always on. Traditional boilers only use a part of the sensible heat of the combustion gases because it is necessary to avoid the condensation of the gases, which would lead to corrosive phenomena.

The condensing boiler Radiant R1CR 34 exploits the condensation process of the water vapor in the fumes to recover latent heat, thus offering significantly higher energy efficiency than traditional boilers.

The condensing boiler Radiant R1CR 28 is a boiler in which the water vapor in the flue gases condenses. This process allows for the recovery of latent heat of condensation, consequently offering higher energy efficiency compared to a traditional boiler.

The condensation technology used by the boiler Radiant R2K 28 allows the recovery of latent heat from the water vapor in the combustion fumes. This process ensures greater energy efficiency compared to conventional boilers.

In the condensing boiler Radiant R1CR 24, the water vapor in the flue gases is condensed to recover latent heat, significantly increasing energy efficiency compared to a standard boiler.

The Lamborghini NINFA 32 MCS sealed boiler is a boiler in which balanced combustion is achieved through a fume fan, also known as an extractor. It has lower energy efficiency compared to a condensing boiler, however, all combustion is controlled inside an enclosure called the combustion chamber.

The Lamborghini NINFA 24 MCS sealed boiler is a boiler in which balanced combustion is achieved through a fume fan, also known as an extractor. It has lower energy efficiency compared to a condensing boiler, however, all combustion is controlled inside an enclosure called the combustion chamber.

The Lamborghini IXTECH 24 MCS sealed boiler is a boiler in which balanced combustion is achieved through a fume fan, also known as an extractor. It has lower energy efficiency compared to a condensing boiler, however, all combustion is controlled inside an enclosure called the combustion chamber.

The condensation technology used by the boiler Lamborghini SILVER 34 C allows the recovery of latent heat from the water vapor in the combustion fumes. This process ensures greater energy efficiency compared to conventional boilers.

The LUNA 3 AVANT PLUS 240 FI boiler, produced by BAXI, represents a transitional example in the boiler sector. Originally a low-efficiency boiler, it has been transformed into a high-efficiency model with the introduction of a component: the recuperator.

The recuperator is a device that exploits the residual heat present in the exhaust gases, which would normally be dispersed into the environment, to further heat the incoming water. This process not only increases the energy efficiency of the boiler but also helps to reduce the environmental impact.

The BAXI COPPER 280 FI floor-standing boiler is a sealed model with an integrated boiler. This type of boiler, supported on the ground for the boiler's weight, is an ideal solution for those who need a large capacity for domestic hot water production.